Description

This all-inclusive Apeks Tec Diver Starter Kit includes a fully assembled Apeks WTX-D Single Tank Wing System and Apeks MTX-RC Long Hose Regulator* set. Great value, a future-proof, high-quality package for beginner to advanced divers.

All of our DIR Starter Packages are for divers seeking the balanced trim of a hard backplate, single-piece no-clip harness and wing combination paired with the outstanding performance of a long hose regulator set.

The system can easily be adapted to twinset diving by adding a first stage and double wing.

DIR Apeks Starter Package includes

• 1 WTX-D40 Wing,
• 1 Deluxe webbed Harness with aluminium back plate,
• 1 MTX-RC Single Cylinder Regulator Set,
• 2 Apeks XTX200 Regulator for Stages,
• 4 Bolt Snaps 100mm,
• 1 Flip-up Wrist Slate Small,
• 1 Reels 100m & 1 DSMB.

Apeks WTX Single Tank Wing System

The Apeks WTX-D Single Cylinder Wings are narrow in design, allowing a cylinder to nest deep inside them.

Single-cylinder wings, often referred to as donuts, are oval-shaped air cells or bladders that are not permanently attached to a harness. While single-cylinder wings have their origins in the realm of technical diving, they are becoming very popular in the recreational community. Not only are these single-cylinder wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.

Apeks single-cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings fit nicely with the rest of the Apeks WTX collection of high-quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, these single-cylinder wings are built from the finest quality materials.

• K style inflator positioned off-centre so as not to interfere with regulator 1st stage
• Low profile 16” oval-shaped corrugated hose
• Apeks Flex inflator hose
• Safety cable to prevent hyper-extension
• Low profile flat dump valve positioned in front, lower-left side
• 2 large drain grommets
• Centre mesh drain panel
• Lift capacities: WTX-D30 30lbs / WTX-D40 40lbs

Apeks Deluxe One-Piece Webbed Harness

This simple yet strong Apeks Deluxe One-Piece Webbed Harness can take the load of a fully rigged technical diver. It can be easily customised with the hardware of your choice.

• 12’ of 2-inch stiff webbing with centre grommet
• 2” wide crotch strap
• 6 stainless 2” D-rings
• 2 neoprene shoulder protectors
• 2 elastic retaining loops on the shoulders and one on the crotch strap
• Heavy-duty stainless waist buckle
• 6 stainless serrated retainers

Steel or Ali Backplate

Four each upper and lower slots accommodate nylon cylinder cam bands so a single cylinder can be strapped directly to the plate. A series of 4 slots provides lateral stability of the cylinder that traditional two-slot plates cannot.

Three holes at the top of the Apeks Backplate offer a range of height adjustments for the wings and the cylinders. In addition, a corresponding lower centre slot allows for misaligned lower band bolts.

Upper and lower perimeter holes along either side and holes along the bottom allow for accessories mounting. 2″ wide crotch strap slot.

• Aluminium Backplate weighs approx 753g
• Stainless Steel Backplate weight approx 2.2 kg

Apeks MTX-RC Long Hose Regulator Set

The Apeks MTX-RC Single Cylinder Long Hose Regulator Set is designed for the diver that prefers a long hose configuration on a single cylinder. It is also the perfect set-up for the recreational diver looking to transition into twinset diving in the future, as the addition of another first stage creates a twinset regulator configuration.

Combining rugged, military grade engineering with the super-smooth breathing experience that Apeks regulators are renowned for, the MTX-RC single cylinder set dives your way.

Featuring the same freeze-resistant technology enjoyed by the whole MTX-R range, the MTX-RC resists freeflows in even the coldest temperatures, while offering the user the additional flexibility to dial it out for a comfortable breathe in less extreme environments.

All this is achieved using an innovative first stage design that protects the regulator from freezing and a full set of user controls on the second stage to adjust the breathing performance based on the diver’s individual needs.

Apeks MTX-RC Long Hose Regulator Set includes a tactical style messenger bag to keep your regulators safe on your travels. Perfectly sized for a laptop, it’s also your new work bag!

MTX-RC First Stage is cold water rated

The Apeks MTX-RC first stage has a unique over-balanced diaphragm design. As the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase faster rate than ambient. This results in superior performance at depth.

• Satin plated brass body with heat exchanging ribs for maximum thermal performance.
• Break through, innovative over-moulded first-stage endcap and environmental diaphragm helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage.
• Ribbed diaphragm clamp for improved heat exchange in cold water conditions.
• 5 x medium pressure ports, 4 mounted on a rotating turret for improved hose orientation
• 2 x angled high pressure ports for optimal hose routing and fitting of transmitters.
• Double swivel hose for greater freedom of movement and comfort.
• Easy to grip DIN hand-wheel or over-moulded yoke hand-wheel, only requires one hand to release.
• Tested for Octopus use – EN250A to 60 metres cold water.
• Nitrox/Oxygen compatible – Up to 40% O2 outside the EU (European Union).

Second stage with Breathing effort adjuster

Oversize breathing effort adjuster of MTX-RC second stage makes adjustment easy in cold water whilst wearing gloves. Protective bumpers protect the second stage from impacts and scratches in the most vulnerable places.

• Ergonomic and simple to use venturi lever.
• Large purge button.
• Reversible second stage for either a left or right hand gas supply configuration.
• A heat exchanger (patented) dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water for a more comfortable breathe.
• Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. The regulator is supplied with both sets of exhaust tees.
• Comfo-bite mouthpiece
• Flexible nylon braided hose, which has better cold water performance than traditional rubber hose.